Recently, some netizens reaction, moved into their new home in less than a year, your kitchen wall ceramic tile came off the embarrassing phenomenon.Only after consultation with the industry know that turned out to be ceramic tile Its water absorption "blame".
The author visited zhongshan several big household Stores and found that when ceramic tile of choose and buy, few consumers would consult bibulous rate, shops and almost no on product introduction on the water absorption of ceramic tile is introduced in detail.Bibulous rate is?How about the structure of ceramic tile itself and even within the family? The water absorption of ceramic tile whether the higher the better?With these questions, the author interviewed the personage inside course of study.
Thickness have no direct contact with the water absorption
"Bibulous rate refers to the product has certain adsorption to water penetration. That is to say, put the ceramic tile in the water after fully absorb water to increase the ratio of the water quality with the original dry brick quality."Tang on building materials sales staff miss finncannon said.She said that if bibulous rate is low, that means the product strength, not easy to expand, has high internal stability;And bibulous rate is too high, easy to cause the body expansion and crack, resulting in wall brick or a floor tile empty drum."For example, if the tea accidentally fell on the floor tile of bibulous rate is high, difficult to remove tea will penetrate into the field."Visible, bibulous rate has a lot to do with decorate quality.
If ceramic tile is bibulous rate is too high, after ceramic tile shop sticks may fall off, if bibulous rate is low, ceramic tile is likely due to improper shop is stuck and appear fall off phenomenon.
And for the Internet "ceramic tile more thick bibulous rate is better" say, miss finncannon cannot treat as the same.General component is "ceramic tile glazed tile, polishing brick, and archaize brick, these three categories, bibulous rate is different for each material.Skid resistance is strong, and is used in the ground laid of polishing brick and archaize brick hardness than glazed tile, so the first two bibulous rate is lower and more wear-resisting.But the thickness of the ceramic tile with itself absorption and there is no direct link."
The lack of the understanding of water absorption
The water absorption of ceramic tile on the inside of the house beautiful and use has a direct impact, but many consumers are not enough to understand.
Rich escape decoration plaza sales staff interfaces, Mr Zhao said most of the consumer is when the choose and buy will only look for the ceramic tile of brand, even the retail sales staff also had no idea "bibulous rate", "people are trustworthy brand, big generally if the guest is not consulting bibulous rate, we don't do too much."
How to avoid buying into the ceramic tile quality did not guarantee?The personage inside course of study says, at first, all kinds of discounts, cannot be the mall permits can shop to try first.When the choose and buy should follow the following five skills.
A: look at the color and roughness.In general, the color of ceramic tile the clearer, the better, it did have a look at the pinhole to the naked eye, pinhole easy accumulation of stolen goods.2 hear: through strikes to hear the sound distinguishes the density, ringing specification ceramic tile changes sound density and hardness, good quality.Three sensors: field measurement.With a ruler or tape measure, ceramic tile edges and diagonal, check the size.Four blow: from the trace to see quality.Check the surface quality of ceramic tile, can scratch the glazed ceramic tile with good thing to determine the surface hardness of ceramic tile.Try five: see ceramic tile is bibulous rate.Generally speaking, ceramic tile is bibulous rate is low, on behalf of the inherent stability of ceramic tile is taller, also is more suitable for the humidity or moisture content is higher.