Company Profile
News
Generally speaking,Floor tileThe shop is stuck the specification of the program including cleaned the ground - at the local levelCement mortarLeveling and calibration is high, the elastic line to install standard block - material - infiltration, the shop is stuck - irrigation 鏠 - cleaning, maintenance and commissioning, in each procedure has strict requirements, only strictly, to guarantee the quality of the whole decoration.
However, many owner might know somethingCeramic tileBrand, also can buy good qualityCeramic tileProduct, but I don't quite sure ceramic tile shop sticks things, small make up after finishing the many aspects of the data, summarizes the three measures, to ensure the decoration quality of ceramic tile shop sticks.
Measure one: according to decorate a style and size ceramic tile size and colour and lustre is determined
Different decorate a style, different size of space, require corresponding ceramic tile shop is stuck, less space room is not suitable for the ceramic tile color too deep, light color is better, such as white, grey, etc.Blue, green, can let a person feel to the comfort of rural style;The mass-tone attune of the beige is a lot of time sitting room ground, let a person feel gorgeous;Stone floor tile, natural style.
According to in terms of average family, and 10 square meters within the toilet, kitchen, balcony, floor tile size generally choose 300 x 300 mm is the best;The sitting room, bedroom that 20 square metre control brick paving, should choose 500 mm * 500 mm or 600 * 600 mm.More than 30 square meters stateroom, 600 x 600 or 800 x 800 mm are available;If above 40 flat, you can consider to use 800 x 800 mm or 1000 * 1000 mm ceramic tile, such as gold rudderceramicThe mass ofPolishing brickAnd I charged with microcrystalline silicon wafer.
As for wall brick size, completely according to individual hobby, Mosaic, small to big to 240 * 660 mm, 300 * 300 mm wall brick can, such as general toilet and kitchen decorate quality is better, like gold rudder ceramic PaQiangHu series ceramics, specifications have 300 * 300 mm, 300 * 450 mm, 400 * 800 mm, etc.
Measure 2: ceramic tile in front of the shop is stuck to prepare enough work to do
Before ceramic tile shop is stuck, a series of preparation work to do, this is the key to ensure good quality of decorate very link, the preparation work mainly includes: pass the primary ceramic tile the reverse side is clean, and flooded more than 2 hours, after flooding will surface moisture to dry or dry before the shop is stuck;On the surface of the ground and metope grassroots leveling, ensure smooth;Clean up at the grass-roots level, and water wet at the grass-roots level, on the ground when there is no clear water or metope, can the shop is stuck.
And, of course, out of the box choose ceramic tile to remove inappropriate, and to prepare good quality cement mortar, the details will affect the quality of the shop is stuck.
Measure 3: in the process of the ceramic tile shop sticks must do some of the detail processing
Should timely to ceramic tile shop sticks ceramic tile, the seam of excess adhesive material scraping clean, with a wet cotton cloth to wipe the stains out of brick, don't wait for bonding material of dry wipe again after cleaning, it may be difficult to clean.
Shop is stuck in the process, at the same time the other decoration works do not contaminate the ground, not people trample, forbidden to walk the floor tile on at least two days.The jointing process of ceramic tile also should strictly required.
Company Profile
Customer Service
Product Details
Contact Center
Copyright(C)2013,Jinjiang Qianxing Ceramic Co.,Ltd All Rights Reserved. Supported by Toocle Copyright Notice 闽ICP备06000278号
